Ewheel ADC adapter V3 for diy ebike escooter with vesc
All in one function adapter for diy Electric skateboar Escooter with VESC :
- Horn, Head light, Turn Signal light, Brake and rear light, and reverse light support.
- High, middle, low, 3 level throttle support.
- Motor reverse and cruise support.
- Buzzer to remind turn and settings.
- Support both hall brake and mechanical brake input.
- Support bidirectional throttle(two-way throttle)
- Two / one motor drive support.
- Each output port (for horn/front lights/turn signal lights/brak lights) max current is 3A,12V
- Size: 63 x 53 x 12.5 mm (same size with V2 adapter)
What 's upgraded from Adapter V2?
Function Port :
Notes:
① Only connect one this UART cable in Ubox, it means two motors run in same step.
② Connect both two UART cables in Ubox, if you want to run two motors independently, then need to turn off Ubox internal can bus
③ Cruise function works by a swtich
④ Reverse funftion works by a switch
⑤ This kind of brake lever has internal swtich, it can trigger on the brake light
How to program it in VESC TOOL?
Please refer to this user manual
FAQ:
Will other VESC be compatible with Ewheel ADC adapter V3?
Yes, it works with other VESC and normal ESC(Non-VESC), but still have some difference on the power supply for the lights/horn function.
Ubox(single /dual) : there is 12v power supply port(fan port), which can supply power to the ewheel ADC adapter's output parts(horn and lights etc.)
Other VESC: mostly only have 5v output, you need to source 5v horn/lights to work with ewheel adc adapter v3
Can I use it for normal ESC, NOT VESC ?
YES, it works with normal ESC.
Shipping comes:
- Ewheel ADC adapter V3 (recommend to work with ubox V2)
- Cables (2pc* 8pin UART cable, 1pc* 12v 3pin cable, 5pcs*3pin cables,12pcs *2pin cables )
- Options for single /dual mode switch button :
- spec 12mm latching button
- cable length: 80cm